Select Page

Do you know the best way to vacuum a pool? What types of pool vacuums are there? How do you properly attach a vacuum head to vacuum a pool?

If you want a spotless pool, but need help figuring out where to start, look no further. We’ve created this definitive guide to help your pool look and feel cleaner!

What is the Right Way to Vaccum a Pool? 

There are many right ways to vacuum your pool. However, there are ways to vacuum your pool won’t get the job done right or effectively.

Manual pool vacuuming can be time-consuming, but when done properly it can keep your pool balanced and clear. In the long run, taking the time to vacuum your pool will prevent intense cleaning in the future.

The pool vacuum hose attaches to the vacuum head and pulls water and debris from the bottom of the pool. The debris that lingers on your pool floor is then pushed into your pool pump strainer, where the debris is filtered out.

How the vacuum works varies a little depending on the type of pool system you have in your yard. A pool vacuum cleaner usually has a vacuum plate that creates suction and allows the water to go into the pump.

This is known as manual pool vacuuming. Alternatively, you can use robotic pool cleaners. Robotic pool cleaners are easier to use and require less oversight and work on your part. You can run a robotic pool cleaner all on its own without having to direct or guide it.

You shouldn’t use a robotic pool cleaner if you’re not home or have someone who can check on it periodically. This is because sometimes these machines get stuck on the pool walls or floor and need a little nudge.

Neither of these methods is right or wrong. They’re a personal choice based on your personal needs and financial abilities.

What Will You Need to Properly Vaccum Your Swimming Pool? 

To properly vacuum a pool you need the following tools:

  • Vacuum hose
  • Vacuum head
  • Vacuum hose clamp
  • Pool vacuum
  • Pool pump
  • Pool pump strainer
  • Garden hose

If you purchase a pool vacuum at your local pool shop you’ll most likely get most of these parts. The vacuum hose and vacuum head are usually included in the box along with the pool vacuum.

Sometimes the hose is not included. If this is the case, most standard pool hoses will work for sucking the water into your pool’s filter system.

To begin, you much assemble your pool vacuuming tools. The vacuum head gets attached to the telescoping pole. These poles are slender, strong, metal pools that are long enough to reach the bottom of your swimming pool.

The hose is then attached to the vacuum head and the pool’s filter system. Once these are all attached, turn on your filter and start vacuuming.

The filter might lower your pool water levels while you vacuum. Have your garden hose in the water refreshing the water as you go. You’ll need the water to maintain a certain level for the pool’s filter system to work properly.

How To Properly Adjust Your Filter to Remove Debris From the Water? 

The right filter setting for vacuuming your pool is the filter valve setting. This setting allows the pool water picked up by the vacuum head and hose to be pushed through the filter sand or DE.

Once the water passes through the filter media, it is pumped back into the pool. However, if you’re trying to remove large quantities of contaminants and debris from your water, you’ll want to bypass this system.

Select the waste setting to effectively pull the debris into the pool filter. After vacuuming your pool, make sure you backwash your filter. It’s especially important to replenish your pool water when using this setting since it will pull a lot of water out of your pool.

How Long Does it Take to Vacuum Your Pool? 

Vacuum time can vary depending on the level of dirt and debris in your pool water. If you clean your pool manually you can expect to spend between 2-6 hours cleaning your pool.

If the pool has an algae issue, it can also take a much longer time to clean. This is because you’ll have to scrub the pool floor and walls to extract spores from the crevices. You can use a pool brush for this since they’re the most effective way to gently scrub the materials from the pool.

Cleaning your pool once or twice a week can help keep the cleaning time to a minimum. Unless you’re experiencing heavy pollen or leaves falling into your pool, you should spend between 2-3 hours every week cleaning your pool.

If there’s a lot of debris from a recent storm, then you could be looking at 6-8 hours of vacuuming. If you perform regular pool maintenance you shouldn’t be spending more than 2-3 hours vacuuming each week.

How Should You Attach the Vacuum Head to the Vacuum Hose? 

Attach the vacuum head to the vacuum hose. These parts should slide together easily and shouldn’t feel forced. Once they’re attached, screw the pool vacuum pole to the head and submerge them into the pool water.

Once they’re in the pool fill the hose with water so it’s easier to create suction.

Is it Better to Use a Vacuum Plate Versus No VacuumPlate? 

The vacuum plate is usually a white or grey disc that goes over the skimmer basket. It helps create suction so the vacuum head can pull the water from the pull into the pump. It’s usually easier and quicker to use a vacuum plate and to not use one, but it’s not necessary.

You can also vacuum your pool by inserting the pool hose into where you keep the skimmer basket. Remove the basket and insert the hose into the suction hole to create an effective vacuum seal.

How do You Clean Your Pool Supplies After Vacuuming? 

First, you’ll always want to ensure you backwash your pool filter after you finished vacuuming. There will be a lot of debris and algae in there that you won’t want clogging your pool filter parts.

Remove the strainer basket and rinse out any lingering debris or algae spores. You may want to spray it down with fresh water from the hose.

Drain any water that’s accumulated in the vacuum head, hose, and pole. Pick off any debris that clings to these parts and rinse them with fresh water.

Finally, switch your filter system back to the filter setting. This is the regular setting your pool filter should be set to at normal times.


Vacuuming your swimming pool might seem time-consuming, but it’s worth the effort. Regular pool maintenance can prolong the lifespan of your pool parts and keep your pool chemicals balanced.

This will prevent clogs in the filter, broken parts, and corroded metal. We hope this article helps you maintain a clean and spotless pool this year!


Why is It Important to Vacuum a Pool? 

Vacuuming your pool is important since it removes large pieces of debris from the water. This debris can introduce bacteria and algae to the water. Contaminants cause your pool chemicals to become imbalanced, making the water potentially hazardous for swimming.

How Often Should You Vacuum Your Swimming Pool?

You should spend a minimum of 2 hours once a week vacuuming your pool. Scrubbing the pool floor and walls and vacuuming it after can help prevent algae.

This practice is a great way to save you time in the long run. It can be more costly and time-consuming to have to shock your pool and rebalance your pool water chemistry.

How Long Should the Pool Pump Run After Vacuuming Your Pool?

You should test your pool water after vacuuming it and add any extra chlorine, acid, or other chemicals necessary. You should leave the pool pump on for 6-8 hours to circulate these chemicals and pull out any lingering particles from the water.

What is a Telescoping Pole?

A telescoping pole is a light weight metal pole used to bring the pool vacuum down to the bottom of the pool. They’re usually made from aluminum or other stainless metals that won’t contaminate the water.

Why a Vacuum Loses Suction?

Your vacuum can lose suction if it’s jammed with debris or the filter is too full. You can try backwashing your filter for a few minutes and disconnecting the hose to run water through it. This should clear out any lingering debris and allow your vacuum to do its job correctly.